Support Adapter Installation

 
 

INSTALLATION OF YOUR PHONE ADAPTER

If your computer connected to modem through router you should do following:

  • Power off your network devices, including your modem and PC.

B. Disconnect LAN cable between pc and router, then connect it to port INTERNET on your phone adapter and connect it to LAN port of your router.

C. Connect one end of the Ethernet network cable to the ETHERNET port of the Phone Adapter. Connect the other end to your pc.

D. Connect one end of a different Ethernet network cable to the INTERNET port of the Phone Adapter. Connect the other end to your cable/DSL modem.

Connect any regular phone to port Phone1.

E. Power on your adapter.

F. Plug in, with 30 seconds interval, all your devices: modem, phone adapter, router, computer.

G. Check if the internet on your computer is working.

H. On your phone adapter two green lights, Power and Network, will be on.

After finishing all steps, leave your adapter on; activation may take up to 10 minutes. Your phone will be ready to use when light PHONE1 is green. If you bought two lines the PHONE2 light will be green as well. If after 10 minutes activation was not completed reconnect power on your phone adapter.

The Linksys SPA 2102 is ready when the PHONE 1 light on the top of the adapter is green. This may take up to 10 minutes, as the adapter needs to register with ZID. Once the Power LED, Ethernet LED, and Line 1 LED are solid green then your phone is ready to make and receive calls. When the PHONE 1 light is solid confirm your Internet connection .

2. If you do not have a router, you should do following:

  1. Power off your network devices, including your modem and PC.

B. Disconnect cable between modem and computer, from port marked as WAN on your phone adapter, then connect it to port INTERNET on your phone adapter.

C. Connect one end of the Ethernet network cable (included) to the ETHERNET port of the Phone Adapter. Connect the other end to the Ethernet port of your PC.

D. Connect one end of a different Ethernet network cable to the INTERNET port of the Phone Adapter. Connect the other end to your cable/DSL modem.

Connect any regular phone to port Phone1.

E. Power on your adapter.

F. Plug in, with 30 seconds interval, all your devices: modem, phone adapter, router, computer.

G. Check if the internet on your computer is working.

H. On your phone adapter two green lights, Power and Network, will be on.

 

ZiD Internet div of ZYMOS, Inc.
©Copyright
ZiD Internet - Internet Service Provider and Webhosting provider